CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
108 / 144
EN
A new connection appear in the "Port" field after accept changes. Select them and click
“Play” button. On the monitor, there are shown information about device type, serial
number, firmware and PCB version, and time set on the CPX device.
Device Monitor additionally provides the feature of overseeing the following parameters:
AC voltage,
GSM signal strenght
connection with OSM.Server (monitoring station)
tatus of the wired and wireless lines (inputs) – when you move the cursor on the
line, additional information will come up, such as:
o
Input type, for example wired (NO)
o
Serial number
o
Reaction type, e.g. immediate, 24h tampering
o
Signal level
o
status – intact, alarm, tampering or unused (when the detector is not assigned to
any partition)
