CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
92 / 144
EN
chapter 9 User’s Functions and its subsections. The Admin is an A1 user and their
rights can’t be changed.
2.
Regular user – a user who can arm and disarm the system and has access to the
history of alarms and failures, the status of inputs, and can block inputs, change their
code, test inputs and outputs.
3.
Arming only – a user who can only arm the system. They do not have access to
functions that require a code. If the option “Access to alarm and fault memory
requires authorisation” has not been enabled during the set-up, this user can enter
the functions to which this option applies (see chapter 9).
6.6.
MONITORING
That option allows determining which of available signals generated by the equipment will
be transmitted to the monitoring station.
NOTE: The “Configuration change” event refers to configuration
change via SMS or via GPRS instructions only.
6.6.1.
Events
