Docomo L-06A Prime Series, Instruction Manual

Page: 279 / 553

i-αppli
Software List Screen Sub Menu
a
Software list screen (P275) ▶ Move the cursor
to a software ▶
M
[Menu] ▶ Perform the
following operations
[Set i-αppli To]
Set conditions to start the selected software.→P285
[Auto start time]
Set whether to start the selected software automatically, and set
the date and time to start if the auto start is specified.→P284
[Software set]
Set the selected software settings.→P277
[Software info]
Display the selected software information such as a name and
version of the i-αppli. The displayed items differ depending on the
software.
[Upgrade]
Upgrade the selected software.
[Delete]
Delete a software.→P287
Note
<Upgrade>
• During an update, a confirmation may appear notifying you
that the upgrading will use terminal data (stored data or
serial number of the terminal/UIM). Select "Yes" to start
downloading. Press
I
[Detail] to check the details of the
terminal data to be used. In this case, the terminal data is sent
to the IP (Information provider) via the Internet, and it could
be intercepted by a third party. However, this action does not
reveal your phone number, postal address, age, or gender to the
IP or others.
Setting i-αppli Operating Conditions
Set operating conditions for each software program. You can
set a software to automatically perform communication while
it is running or set separately whether to allow to browse
icon information, Phonebook, etc.
• Some items may not be changed depending on the software.
a
Software list screen (P275) ▶ Move cursor
to the software ▶
M
[Menu] ▶ "Software
set" ▶ Perform the following operations
[Stand-by display]
Set the selected software as the Stand-by display.→P285
[Network set]
Set whether to allow communications while software is running.
[Stand-by network set]
Set whether to allow communications while i-αppli is set as the
Stand-by display.
Continued on next page