Docomo L-06A Prime Series, Instruction Manual

Page: 236 / 553

Camera
[White balance]
Set hue/tint for the image. When set according to the capturing
conditions, a naturally colored moving picture can be produced.
[Video quality]
Set the image quality used when saving the moving picture.
[Size restriction]
Restrict the file size of a moving picture.
[Memory in use]
Set the save location for a moving picture.
[Auto Saving]
Set whether to save the moving picture automatically.
[Type]
Set whether video and sound are to be included in a moving picture.
[Common mode]
Set file size suitable for attaching to i-mode mail (up to 500KB).
• If set to "On", you can select image size from "QCIF (176×144)" or
"Sub-QCIF (128×96)" and the Image quality is set to "Super fine"
and the Size restriction is set to "For mail short".
[Flicker tuning]
The flicker on the screen under a fluorescent light, etc. may be
reduced.
Auto : Suppress the flicker automatically.
50Hz : Select this option in the location where the frequency of the
power is 50Hz.
60Hz : Select this option in the location where the frequency of the
power is 60Hz.
[Reset settings]
Restore the moving picture capture settings to default.
Note
<Flicker tuning>
• If you record the moving picture in the size of "QVGA
(320×240)" in a room where 50Hz fluorescent light is used,
flicker may not be reduced.
Bar code reader
Using Bar Code Reader
You can scan information embedded in a JAN code or QR
code using the Outer camera. You can create i-mode mail
or connect to the Internet using the scanned information.
You can also save or play the scanned information, image or
melody.
• UP to 5 pieces of scanned information can be saved.
• Scan the code when the entire code is displayed on the screen.
• Hold the camera parallel to the code.
b
JAN codes
JAN code is a bar code representing numbers using
vertical bars in different thickness and spaces. 8-digit
(JAN8) or 13-digit (JAN13) bar code can be scanned.
• The scanned result of the following JAN code is
"4942857123456".