Docomo L-06A Prime Series, Instruction Manual

Page: 277 / 553

i-αppli
• If the software download fails due to weak signal reception, the
software may be saved partly. If you download again or select
the partly saved i-αppli on the Software list, the rest of the file
will be downloaded together.
• Even if the software download fails due to weak signal reception
after old software was deleted to increase the available space
on the FOMA terminal, the old software cannot be restored.
• Some software that starts immediately after being downloaded
cannot be saved.
Downloading a Mail-Connected i-αppli
Note the followings if you download a mail-connected i-αppli.
• If you download a mail-connected i-αppli, a folder for the mail-
connected i-αppli is automatically created in Inbox and Outbox.
A 0created folder takes the downloaded mail-connected i-αppli
name and it cannot be changed.
• Up to 17 (100 including all other i-αppli) mail-connected i-αppli
can be saved.
• If you attempt to download a mail-connected i-αppli, which will use
an existing folder for a mail-connected i-αppli saved in the FOMA
terminal, the attempt will be denied.
• If only a folder for a mail-connected i-αppli is left in the FOMA
terminal, and you attempt to download a mail-connected i-αppli
again which uses the same folder, the folder can be used. If the
folder is not used, you can delete it and create a new folder. A
mail-connected i-αppli cannot be downloaded if you do not create
a folder for it.
• The folder for the compatible mail-connected i-αppli cannot be
deleted with the mail-connected i-αppli left in the FOMA terminal.
The folder can be deleted when a mail-connected i-αppli is not in
the folder. In this case, folders created in both Inbox and Outbox are
deleted at a time.
• When you delete an mail-connected i-αppli, you can select whether
to delete the automatically created folder at once. However, if
protected mails are in the folder, the folder cannot be deleted.
Display SW info
Viewing i-αppli Information at Download Time
Set whether to display software information when
downloading the software.
a
M
▶ "i-αppli" ▶ "i-αppli settings" ▶ "Display
SW info" ▶ "Display"/"Not display"
Starting i-αppli
a
Stand-by display ▶
I
(for 1+ seconds)
•
I
[Switch]: Switch the view of the
Software list screen.
•
g
[▲]/
T
[▼]: Scroll to the screen to
previous/next page.
Software list
screen
b
Icons on the Software list screen
Icon Description
Standard i-αppli
i-α ppliDX
Auto start set i-αppli
i-αppli downloaded via SSL communication
i-αppli set to Stand-by display
Osaifu-Keitai compatible i-αppli
Continued on next page