Docomo L-06A Prime Series, Instruction Manual

Page: 418 / 553

Overseas Use
Network search mode, 3G/GSM setting
Setting a Search Method of
Telecommunications Carrier
Select a search mode to find available networks when the
network is switched overseas.
• By default, "Network search mode" is set to "Auto". In Japan or while
connecting to the 3G network, setting "3G/GSM setting" to "3G" is
recommended to reduce the battery drain.
a M
▶ "Settings" ▶ "International roaming" ▶
"Network" ▶ Perform the following operations
[Network search mode]
Auto : Automatically search and set a network.
Manual : The Network search screen appears. Select and
configure one of the networks in the list.
▶ "Yes" ▶ Select a network
• Available networks are followed by "0" mark.
Network
re-search : Search a network using the same method (Auto/Manual)
as the previous search.
[3G/GSM setting]
Specify a network to be searched.
AUTO : Search both 3G and GSM/GPRS networks, and give
priority to 3G when detected both networks.
3G : Search only 3G network.
GSM/GPRS : Search only GSM/GPRS network.
• Before setting, check the communication system of the country
where you use.
[PLMN setting]
Prioritize networks to be searched or set.→P417
[Operator name disp]
Set whether to show the name of the currently connected network on
the Stand-by display.→P418
[Host selection]
Specify a host other than i-mode.→P199
[SMS center]
Set the SMS center address.→P178
Note
• After returning to Japan, if the network status indicator remains
out of service area, set "3G/GSM setting" to "AUTO" or "3G",
and "Network search mode" to "Auto".
<Network search mode>
• Searching for networks may take a while.
• When this option is set to "Auto", the FOMA terminal
reconnects to available network automatically.