Docomo L-06A Prime Series, Instruction Manual

Page: 131 / 553

Security Settings
Anonymous caller
Setting Actions when Calls
Arrive from Anonymous Callers
You can set whether to accept or reject calls without caller
ID per reason for anonymous call.
a M
▶ "Settings" ▶ "Call/VT/Dialing" ▶
"Incoming call" ▶ "Anonymous caller" ▶
Enter the Terminal security code ▶ Perform the
following operations
[User unset]
Set options for incoming calls without caller ID at the caller's will.
Response : Set response method for anonymous caller.
Disable : Cancel the setting.
Reject call : Reject incoming calls.
Silent alert : Mute the ring tone. You can select an image for the
incoming call from images saved in "My picture" of
"Data box".→P296
Alert setting : Select an image and ring tone for the incoming call
from data in "Data box".
Incoming call
image : Set an image for anonymous caller.
▶ "Terminal setting"/"Image"/"i-motion" ▶ Select an
image
Ring tone : Set ring tone for anonymous caller.
▶ "Terminal setting"/"MUSIC"/"i-motion"/"Melody" ▶
Select a ring tone
• If Chaku-Uta Full
®
saved in "MUSIC" is selected, go
to Step 3 in "Setting a Chaku-Uta Full
®
Song as a
Ring Tone" (P266).
[Pay phone]
Set options for calls made from payphones.
• Set items and operations are the same as in "User unset".
[Not support]
Set options for calls for which caller ID cannot be sent such as calls
made from overseas or from a land-line phone via forwarding services.
(Caller ID may be sent depending on the carrier.)
• Set items and operations are the same as in "User unset".
Note
• If an anonymous call set to "Reject call" arrives while the
Anonymous caller is activated, the call is not notified and
appears on the Stand-by display. The call is recorded in
Received call log as a missed call. The other party hears a
busy signal. Calls are rejected even when the Voice mail or
Call forwarding service is activated. However, if Ringing time is
set to 0 second or the FOMA terminal is out of service area or
turned power off, network services are activated.
• i-mode mail or SMS messages are received regardless of the
rejection settings.
• If "Select ring tone" (P100) or "Call & Mail image" (P109)
is set with a moving picture/i-motion with audio/video for a
specific caller and change either of them, the default sound or
image, even if the response method is set to "Alert setting", is
played for "Ring tone" or "Incoming call image" with the setting
unchanged.
• If a moving picture/i-motion with video/sound is set as either
"Incoming call image" or "Ring tone", the same moving picture/
i-motion is set for the other item.
<User unset>
• If the Caller ID request service is activated, it takes priority over
the settings of "Anonymous caller". The caller hears the voice
guidance for a Caller ID request.