Docomo L-06A Prime Series, Instruction Manual

Page: 145 / 553

Mail
Note
• When characters with "Telop" or "Swing" set are selected and
copied or cut, "Telop" or "Swing" will not take effect.
<Insert image>
• Up to 90KB or 20 images can be inserted. The number of
available attachments may be reduced depending on the file
size. If the maximum number of images or size is exceeded, a
warning message appears.
• By default, images are saved in the "Decomail picture" and
"Decomail picto" folders.
• If the same image is inserted more than once, it is considered
that one image is inserted.
Specifying a Decoration before Entering Characters
a
Message text entry screen (P138) ▶
g
[Deco] ▶ Select (Char decoration) ▶
Perform the following operations
[ (Font color)]
Set the color for characters.
• You can also select a color from the palette by pressing
I
[Palette].
[ (Font size)]
Set a font size.
[ (Blink)]
Set the text to blink.
• To cancel blinking, select
(Blink).
[ (Move/Align)]
Set the display of the text.
• To cancel the setting, select
(Move Align (Default)).
(Telop)
: Set the text to display from right to left as a telop.
• Characters entered between and appear as
a telop.
(Swing)
: Set the text to swing.
• Characters entered between and swing.
(Left)
: Align characters to be entered or images to be
inserted to the left.
(Center)
: Align characters to be entered or images to be
inserted to the center.
(Right)
: Align characters to be entered or images to be
inserted to the right.
b C
[Set] ▶ Enter characters
Note
<Font size>
• The size of Deco-mail pictogram cannot be changed.
<Font color>
• Pictographs are also displayed in the specified color. To
restore the default color, select on the right of (Text color
(Unchange)) from the color palette.
<Blink>
• When characters set to blink are displayed on the preview
screen or the Compose message screen, the characters stop
blinking after a certain period of time.