Docomo L-06A Prime Series, Instruction Manual

Page: 23 / 553

Easy Search/Contents/Precautions
Handling Precautions
General Usage Guidelines
b
Do not let the equipment get wet.
The FOMA terminal, battery pack, adapter, and UIM are not
waterproof. Do not use them in places with high humidity
such as a bathroom or where rain may get them wet. If
you carry them close to your body, moisture from sweat
may corrode the internal parts causing a malfunction.
Note that malfunctions deemed to be caused by water
are not covered by the warranty, and may be impossible to
repair. Since these malfunctions are not under warranty,
even when repair is possible, it will be done at the user's
expense.
b
Clean the FOMA terminal with a dry, soft cloth (Lens
cleaning cloth).
• In some models, the display of the FOMA terminal has a
special coating so that it is easier to see. If you rub the
display roughly with a dry cloth, it may be scratched. Take
care of how you handle the FOMA terminal, and use only
a dry, soft cloth such as used for cleaning glasses. If the
display is left with water drop or stain adhered, smear may
be generated or the coating might peel off.
• Do not use alcohol, thinner, benzene, detergent, or other
solvents for cleaning, otherwise the printed images may
disappear or discoloration may result.
b
Occasionally clean the connector terminals with a dry
cotton swab, etc.
If the connector terminals become dirty, the contact may
become loose and the FOMA terminal power may be turned
off or insufficient charge may result. Wipe the connector
terminals with a clean dry cloth or cotton swab.
Also, be careful not to break the connector terminals when
cleaning.
b
Do not place the FOMA terminal near air conditioner
outlets.
Condensation may form due to rapid changes in
temperature, and this may corrode internal parts and cause
malfunction.
b
Do not use excessive force using the FOMA terminal or
the battery pack.
If the FOMA terminal is put under heavy objects in a bag, or
if it is sat upon while in your pocket, its LCD, internal PCBs,
or the battery pack may be damaged or malfunction. If
extraneous devices are inserted to the external connector
terminals, the connector may be damaged or malfunction.
b
Carefully read each manual attached to the FOMA
terminal, adapter, or the desktop holder.
b
Do not rub or scratch the display with a metal object.
Doing so may cause damage or malfunction.
Precautions for the FOMA Terminal
b
Do not push the surface of the touch panel strongly or use
a sharp object such as a finger nail, ballpoint pen, or pin for
touch panel operations.
The touch panel may be damaged.
b
Avoid extreme temperatures.
The FOMA terminal should be used within a temperature
range from 5℃ to 35℃ and a humidity range from 45% to
85%.
Continued on next page