Docomo L-06A Prime Series, Instruction Manual

Page: 55 / 553

Before Using the Handset
Set Date&Time
Setting Date and Time
You can set the FOMA terminal to update the time
automatically. Also, you can set the local time zone, daylight
saving, and date&time.
a
M
▶ "Settings" ▶ "Date&Time" ▶ "Set
Date&Time"
Date&Time
settings screen
b
Perform the following operations
[Auto time adjust]
Set whether to adjust the time on the FOMA terminal based on the
time information from the network.
ON : Adjust the date and time automatically.
OFF : Does not adjust the date and time automatically.
[Local time zone]
*
Set the time zone for the date and time.
Press
M
[<Prev.] or
I
[Next>] to switch the list by page.
[Daylight saving] *
Set the daylight saving time.
[Set date&time]
*
Set date and time manually.
• You can set the date between 1980/01/01 and 2099/12/31.
* Available when "Auto time adjust" is set to "OFF".
c I
[Done]
Note
<Auto time adjust>
• Time or time differences can be adjusted when the power is
turned on.
• If time is not adjusted for a while after the power is turned on,
turn the power on again.
• Time may not be adjusted depending on the signal strength,
etc.
• When using the FOMA terminal overseas, the time or time zone
may not be adjusted depending on the network service to use.
Also, the time may not be properly displayed. Set the time of
the location where you stay with the World time.→P363
• An error of a few seconds may occur.