Docomo L-06A Prime Series, Instruction Manual

Page: 68 / 553

Voice/Videophone Calls
Note
• When the recipient received Chaku-moji, "Transmission
completed" appears and transmission charge applies.
• Under the following conditions on the receiver side,
"Transmission failed" appears and transmission charge does
not apply.
- Chaku-moji incompatible terminal
- Chaku-moji restricting to be sent in Message display setting
- Staying overseas
*
- While Public mode (Drive mode) is set
*
- When the answer time of Record message is set to 0 sec
*
- Out of service area or the power is turned off
*
* The sent result does not appear.
• Depending on the signal conditions, the sent result may not
appear even when Chaku-moji arrived at the other party's
terminal. In this case, transmission charges apply.
• Chaku-moji cannot be sent/received for overseas usage.
184/186
Setting Caller ID to Send/
Not to Send for Each Call
There are 2 ways to show/hide the caller ID for each call:
adding "184"/"186", and using the sub menu on the Phone
number entry screen.
Adding 184/186 to Send/Not to Send
Caller ID
a
Enter "184" (Do not notify)/"186" (Notify) ▶
Enter the phone number
b
To make a voice call
A
To make a videophone call
g
[V. phone]
Using Sub Menu to Send/Not to Send
Caller ID
Example: To use the Phone number entry screen sub menu
a
Enter the phone number ▶
M
[Menu] ▶
"Caller ID" ▶ "Not notify"/"Notify"/"Cancel"
b
To make a voice call
A
or
C
[Call]
To make a videophone call
g
[V. phone]
Note
• You can set to show/hide the caller ID to the network in
advance.→P54