Docomo L-06A Prime Series, Instruction Manual

Page: 534 / 553

j
Check the settings on the "全般
(General)" tab
If more than one modem is connected to the PC,
enable only "モデム－FOMA L04A (Modem－FOMA
L04A)" in the "接続の方法 (Connection Method)"
field.
• Disable "ダイヤル情報を使う (Use dialing
information)".
k
Click the "ネットワーク (Networking)"
tab ▶ Configure various settings
Mark the "インターネット プロトコル バージョン
4 (TCP/IPv4) (Internet Protocol 4 (TCP/IPv4))"
checkbox in the "この接続は次の項目を使用します
(This connection uses the following items)" field.
Obtain the settings for "QoSパケット スケジューラ
(QoS Packet Scheduler)" from your ISP or network
administrator.
• To set up TCP/IP, click [プロパティ(Properties)].
Contact your ISP or network administrator for
setting up.
l
Click the "オプション (Option)" tab ▶
Click [PPP設定 (PPP Settings)]
m
Remove checkmarks from all items
▶ Click [OK]
n
On the "オプション (Option)" tab, click
[OK]
Setting on Windows XP
a
Click "スタート (Start)" ▶ "すべて
のプログラム (All programs)" ▶ "ア
クセサリ (Accessories)" ▶ "通信
(Communication)" ▶ "新しい接続ウィ
ザード (New Connection Wizard)"
b
On the New connection wizard
screen, click [次へ (Next)]
c
Select "インターネットに接続する
(Connect to the Internet)" ▶ Click
[次へ (Next)]
d
Select "接続を手動でセットアップする
(Set up the connection manually)" ▶
Click [次へ (Next)]
e
Select "ダイヤルアップモデムを使用し
て接続する (Use a dial-up modem to
connect)" ▶ Click [次へ (Next)]
f
If the "デバイスの選択 (Select a
device)" screen appears, select "モ
デム－FOMA L04A (Modem – FOMA
L04A)" ▶ Click [次へ (Next)]
The "デバイスの選択 (Select a device)" screen
appears only when the PC has more than one
modem.
Continue on the next page