Docomo L-06A Prime Series, Instruction Manual

Page: 328 / 553

Data Management
Using the FOMA Terminal as a
microSD Card Reader/Writer
Connect this FOMA terminal with a microSD card inserted to
a PC and read/write data on a microSD card.
• To use a microSD card, you need a microSD card separately.
• Only a PC with Windows Vista, XP, or Windows 2000 (Japanese
versions) can be used to read/write data on a microSD card.
Operation with other OS is not guaranteed.
• To use the FOMA terminal as a microSD card reader/writer, set up
the USB mode. Before setting the USB mode, disconnect the FOMA
USB Cable with Charge Function 01/02 (optional).
a
M
▶ "Settings" ▶ "Others" ▶ "USB mode
setting" ▶ "microSD mode"
b
Open the External Connector Terminal cover of
the FOMA terminal (
a
) and insert the external
connector of the FOMA USB Cable with Charge
Function 01/02 with the front side (indicated
by a mark, label, etc.) up until it clicks (
b
)
c
Connect the USB connector of the FOMA USB
Cable with Charge Function 01/02 to a USB
port on a PC (
c
)
USB connector
Release button
External connector
(label side up)
Release button
Note
• When removing a microSD card or the FOMA USB Cable with
Charge Function 01/02 from a PC, be sure to perform the
procedure on safe removal for hardware from the task tray of
the PC. Removing the memory card or FOMA USB Cable with
Charge Function 01/02 without performing the proper steps
may result in data loss.
• When switching USB mode setting, disconnect the FOMA USB
Cable with Charge Function 01/02 first. When the FOMA USB
Cable with Charge Function 01/02 is connected, the USB
mode cannot be switched.
• If the FOMA USB Cable with Charge Function 01/02 is
disconnected, the USB mode setting automatically returns to
"Communication mode".
b
Important
Make sure that the FOMA terminal is correctly connected to a
PC. If it is not connected correctly, data may not only fail to be
exchanged but also be lost.