Docomo L-06A Prime Series, Instruction Manual

Page: 238 / 553

Camera
b
For phone number
Select the displayed phone number to open the Phone
number entry screen with the scanned phone number
already entered.
If "Add to phonebook", etc. appears, select it to save to
the Phonebook.
b
For mail address
Select the displayed mail address to create i-mode mail
with the scanned mail address already entered.
If "Compose message", etc. appears, select it to create
i-mode mail with the scanned mail address or subject
already entered .
If "Add to phonebook", etc. appears, select it to save to
the Phonebook.
b
For URL
Select the displayed URL to access the URL.
If "Add bookmark", etc. appears, select it to save as
Bookmark.
b
For text
The scanned characters are displayed.
b
For image
The scanned image is displayed.
b
For melody
Press
C
[Play] to play the scanned melody.
If you press
C
[Stop] during a playback, the melody
stops.
b
For i-αppli
If "Start iappli", etc. appears, select it to launch.
Note
<Common functions>
• Bar codes other than JAN codes, QR codes, and 2 dimensional
codes cannot be scanned.
• Bar codes may not be correctly scanned because of scratch,
smudge, damage, printing quality, or reflection of light.
• Some codes may not be scanned depending on the type, size,
or QR code version.
• If trying to save more than 5 pieces of data, a confirmation
asking whether to delete older data first appears. To save the
new data, select "Yes" ▶ select data to delete ▶ select "Yes".
• If Bar code reader cannot scan the code within approximately
30 seconds after being activated, a message indicating that
scanning failed appears. If the Bar code reader cannot scan the
code after a certain period of time, it automatically terminates.
<Compose message>
• If the address has invalid characters, nothing is entered in the
address.
<Make call>
• Valid characters are numbers and symbols [#,
:
, +, －, P,
(, and )]. If the phone number contains characters other than
these, the call cannot be made.
<Start i-αppli>
• If "Set i-αppli To" is not set, you cannot start an i-αppli from
scanned data.