Docomo L-06A Prime Series, Instruction Manual

Page: 289 / 553

i-αppli
Deleting i-αppli
a
Software list screen (P275) ▶ Move the cursor
to a software ▶
M
[Menu] ▶ Perform the
following operations
[Delete]
This item : Delete the selected software.
Selected items : Select and delete software.
▶ Mark software to delete ▶
I
[Delete] ▶ "Yes"
All items : Delete all software.
▶ Enter the Terminal security code ▶ "Yes"
Note
• When the i-αppli to delete is set for auto start or Stand-by
display, a confirmation whether to delete the software appears.
Select "Yes" to delete.
• Some Osaifu-Keitai compatible i-αppli delete data on the IC
card or require to delete data on IC card starting i-αppli before
the deletion, etc.
• Some Osaifu-Keitai compatible i-αppli cannot be deleted.
Using Various i-αppli Functions
You can connect to a site or use the FOMA terminal functions
while an i-αppli is running.
• You need to download the supported i-αppli in advance.
• Some i-αppli may operate the functions differently, or may be
unavailable to use some functions.
Using Camera
• When the camera is activated by i-αppli, captured images will not
be saved in "My picture" of "Data box", however, they are saved and
used as a component of the i-αppli.
a
Use i-αppli to capture an image with the
camera
Using Bar Code Reader
• The camera can be used via an i-αppli to read a QR code and Japan
Article Number code.
• The read result can be used and saved by the software.
a
Use i-αppli to read a code
Using Infrared Communication
a
Use i-αppli to perform infrared communication
Note
• You may not be able to exchange data with some devices even
if they have the infrared communication capability.
• You can also start an i-αppli by receiving i-αppli activation data
via infrared communication.
• When performing infrared communication, any connection with
sites or mail transfer will be canceled.