Docomo L-06A Prime Series, Instruction Manual

Page: 120 / 553

Security Settings
Security Codes Used on the
FOMA Terminal
Some functions of the FOMA terminal require a password.
In addition to the Terminal security code, the Network
security code, the i-mode password, etc. are offered. These
passwords help you utilize your FOMA terminal.
• The entered passwords such as the Terminal security code, Network
security code, and i-mode password are displayed as "＊".
Cautions on security codes
• Avoid setting a password using your birthday, part of your phone
number, your address or room number, "1111" or "1234", which
can be easily guessed by others. Be sure to write down the set
passwords and store them in a separate location.
• Do not reveal your passwords to others. DOCOMO is not
responsible for damage caused by misuse of your security codes
by others.
• If you forget your passwords, you need to bring your ID (driver's
license, etc.), the FOMA terminal and UIM to the docomo Shop.
For details, contact "General Inquiries" at the back of this manual.
Terminal Security Code
The Terminal security code is set to "0000" by default; you
can change the code yourself.→P120
If the Terminal security code entry screen
appears, enter the 4- to 8- digit code and
press
C
[OK].
Terminal security
code entry
screen
Network Security Code
The Network security code is a 4-digit number to be used for
confirming subscriber's identity at an acceptance of order at
the docomo Shop, docomo Information Center, or "お客様サポー
ト (user support)" and accessing network services. You can
set any number at subscription, and can change the number
yourself.
If you have "docomo ID/Password" for "My docomo" which
is a total support site for a PC, you can change the Network
security code from a PC. From i-mode, you can change the
Network security code by accessing "お客様サポート (user
support)" then "各種設定(確認・変更・利用) (subscriptions &
procedures)".
• For "My docomo" and "お客様サポート (user support)", see the
backside of the back of this manual.