Docomo L-06A Prime Series, Instruction Manual

Page: 427 / 553

PC Connection
Packet Communication
Communication charges
*1
are based on the amount of
data sent and received. It is suitable for use to exchange
data only when you want while keeping the network
connected. DOCOMO provides a best-effort service in
which communication speeds change in response to the
communication environment and network congestion.
Using an access point of DOCOMO internet connection
service such as "mopera U" that supports FOMA packet
communication allows you to use high-speed communication
at the maximum rate of 7.2Mbps for receiving and 384kbps
for sending (based on best-effort connection)
*2
.
*1 Communication charges become high when you exchange a large
amount of data.
*2 • The maximum speed of 7.2Mbps for receiving and 384kbps for
sending are theoretical values and they do not show the actual
performance. The actual performance depends on the network
congestion and your communication environment.
• If you connect to an area which is out of the FOMA
HIGH-SPEED Area or an access point that does not support
HIGH-SPEED, the performance may be lower.
L-04A can use an access point, even while in overseas, that
supports 3G or GPRS packet communication to perform data
communication.
Precautions before Use
Internet Service Provider Fees
Fees to an Internet service provider (ISP) are required to
connect to the Internet. These connection fees, paid to the
ISP, are separate from the FOMA service fees. For detailed
information on connection fees, contact your ISP.
You can use DOCOMO Internet connection services;
"mopera U". A separate subscription (fee-based) is required
to use "mopera U".
Setting the Internet Connection
For packet communication, use an access point compatible
with packet communication.
• DoPa access points cannot be connected.
• For service contents of "mopera" and its connection settings, visit
"mopera" web site.
http://www.mopera.net/mopera/index.html (Japanese only)
Conditions for Packet Communication
The following conditions * must be met to connect the FOMA
terminal to a PC and perform communication. However,
even if the conditions are met, communication may still not
be possible depending on the amount of traffic at the base
station or the strength of the signal.
• FOMA USB Cable with Charge Function 01/02 (optional) must be
available on the PC.
• The FOMA terminal must be in the FOMA service area.
• The access point must support FOMA packet communication.
* These conditions are for domestic use in Japan.