Docomo L-06A Prime Series, Instruction Manual

Page: 121 / 553

Security Settings
i-mode Password
The 4-digit "i-mode password" is required to register/remove
contents in My Menu, or subscribe to/cancel message
service, fee-based i-mode services. (Some other information
service providers may set individual passwords.)
The i-mode password is set to "0000" by default; you
can change it yourself. From i-mode, you can change the
password by accessing "iMenu" ▶ "English" ▶ "Options" ▶
"Change i-mode Password".
PIN1/PIN2 Codes
You can set PIN1 and PIN2 codes to the UIM. These
codes are set to "0000" by default. You can change them
yourself.→P120
The PIN1 code is a 4- to 8- digit number (code) required
to identify the user every time the UIM is inserted into the
FOMA terminal or the terminal power is turned on in order to
prevent unauthorized use.
The PIN1 code entry is required to make or receive calls, and
operate the terminal. The PIN2 code is a 4- to 8- digit number
used to reset accumulated call charges, etc.
If the PIN1/PIN2 code entry screen
appears, enter the 4- to 8- digit PIN1/
PIN2 code and press
C
[OK].
• Use the PIN1 and PIN2 codes you set
previously if you purchase a new FOMA
terminal and use the current UIM.
PIN1 code entry
screen (Ex.: For
PIN1 code)
PUK Code (PIN Unblock Code)
The PUK code is an 8-digit number used to unblock the PIN1
or PIN2 code.→P121
You cannot change it yourself.
• If you fail to enter the correct PUK code 10 times in a row, the UIM
is locked.
新規 PIN1 ／ PIN2
コードの設定
10 回連続
入力ミス
入力 OK
の場合
3 回連続
入力ミス PIN ロック解除
コードの入力
ドコモショップ窓口に
お問い合わせください。
PIN1 コード
の入力
PIN2 コード
の入力
OK
Enter PUK
code (PIN
Unblock Code)
Enter
PIN1 code
Enter
PIN2 code
Set new
PIN1/PIN2 code
Contact the
docomo Shop
Failed 10
times in a row
Failed 3 times
in a row