Docomo L-06A Prime Series, Instruction Manual

Page: 60 / 553

Voice/Videophone Calls
Correcting an entered phone number
To delete an entered digit, use
J
to move the cursor to a digit
to delete, and press
Q
.
Screen display during dialing
The other party's name is displayed if the other party's phone
number is saved in the Phonebook.
If a videophone call could not be made
The following messages appear if a videophone call could not
be made (depending on the other party's mobile phone model or
subscribed network services, the displayed messages may not
describe the actual situation).
Message Description
Check number,
then redial The phone number is not valid.
Busy The other party is on a call (this message
may appear when the other party's
mobile phone is performing packet
communication depending on the mobile
phone).
The other party is in packet
communication.
Out of service
area/power off The other party's mobile phone is either
out of service area or turned off.
Set Caller ID to ON The caller ID was not sent (when the call
is made to the number for visualnet, etc.).
Your call is being
forwarded The call is being forwarded.
Redial using voice
call The Call forwarding service is activated,
and the forwarding destination does not
support videophone calls.
Upper limit has
been exceeded.
Connection failed Your usage fees have exceeded the limit
of your plan (Type limit or Family Wide
limit).
Message Description
Please make your
call from i-mode The videophone call was not dialed
from the official i-mode site information
provider (when the call is made to V-live).
Failed to connect Set "Caller ID notification" to "Notify" and
redial.
• This message may appear for other
reasons, as well.
Phone Number Entry Screen Sub Menu
a
Phone number entry screen (P56) ▶
M
[Menu] ▶ Perform the following operations
[Add to phonebook]
Add an entry to the Phonebook.→P88
[Video phone call]
Make a videophone call.
[Caller ID]
Set whether to notify your caller ID when you make a call.→P66
[Int. call]
After selecting the country code to make a call, "009130010"
(WORLD CALL) and the country code are inserted at the beginning of
the phone number.→P67
[Select prefix]
Add prefix number at the beginning of the entered phone number.
This can be added only once.→P68
[Multi number]
If you subscribe to Multi Number, select the number to use when
making a call.→P401