Docomo L-06A Prime Series, Instruction Manual

Page: 546 / 553

AT Commands Overview Parameters/Descriptions
Command
Examples
ATX<n> Set whether to display
the speed in the
CONNECT indication
when connected. Also
detect a busy tone or
dial tone. n=0 : Not detect busy tones,
not detect dial tones,
and not display speed.
n=1 : Not detect busy tones,
not detect dial tones,
and display speed.
n=2 : Not detect busy tones,
detect dial tones, and
display speed.
n=3 : Detect busy tones, not
detect dial tones, and
display speed.
n=4 : Detect busy tones,
detect dial tones, and
display speed (default).
ATX1
OK
ATZ Reset the AT command
settings to the content
in non-volatile memory.
If this command
is entered during
communication, the
settings will not be
reset. － ATZ
OK