Docomo L-06A Prime Series, Instruction Manual

Page: 463 / 553

Appendix/Troubleshooting
Set auto-update
Updating Software Automatically
Download new software automatically and rewrite software
at the time set in advance.
• By default, Set auto-update is set to "auto-update", Day is set to
"None", and Time is set to "03:00".
a
M
▶ "Settings" ▶ "Others" ▶ "Software
Update" ▶ Enter the Terminal security code
▶ "Set auto-update" ▶ Perform the following
operations
[Set auto-update]
auto-update : Update automatically.
only notification : Notify of update information without updating
automatically.
disable : Do not update automatically.
[Day]
*
Specify the day to rewrite software.
[Time] *
Specify the time to rewrite software.
* Available when "Set auto-update" is set to "auto-update".
b
I
[Done]
If Update is Required
When software becomes ready to be rewritten, (rewrite
notice icon) appears on the Stand-by display, and you can
check the time to rewrite and select whether to change the
time or rewrite immediately.
• When the time to rewrite software comes with (rewrite notice
icon) displayed, software is automatically rewritten and (rewrite
notice icon) disappears.
a
In Stand-by,
C
▶ Select (rewrite notice
icon)
b
"OK"
The Stand-by display returns and rewrite starts at the set time.
• "Change time": Change the time to rewrite.
• "Rewrite now": Rewrite starts immediately. For further
operations, refer to "Updating Software Immediately" (P462).