Docomo L-06A Prime Series, Instruction Manual

Page: 294 / 553

Osaifu-Keitai
Note
• Do not subject the FOMA terminal to severe shocks when
holding the mark on the scanning device.
• If the mark held on the scanning device is not recognized, try
moving the FOMA terminal around.
• You can use Osaifu-Keitai functions by holding the mark on
the scanning device even during a call or i-mode connection, or
when the FOMA terminal is turned off (Osaifu-Keitai compatible
i-αppli cannot be activated). However, when the battery pack is
not inserted or the battery pack is not used for a long time even
if it is inserted, or the FOMA terminal is left without charging
after sounding the battery alarm, this function may be disabled.
Charge the battery pack.
• When the mark is held on the scanning device, Osaifu-Keitai
compatible i-αppli may be activated.
• You can set the FOMA terminal to light or blink the illumination
when the scanning device recognizes the FOMA terminal.→P113
IC card lock
Locking IC Card Function
This function allows you to prevent the IC card functions
from being used by others.
a
Stand-by display ▶
C
(for 1+ seconds)
When the IC card lock is set, appears on the Stand-by display.
Canceling the lock
Stand-by display ▶
C
(for 1+ seconds) ▶ enter the Terminal
security code.
IC card lock set
Locking IC Card Functions when Turning
Power On/Off
a
M
▶ "Osaifu-Keitai" ▶ "IC card lock set" ▶
Enter the Terminal security code ▶ Perform the
following operations
[IC card lock(Power ON)]
Set whether to lock the IC card functions when the FOMA terminal is
turned on.
[IC card lock(Power OFF)]
Set whether to lock the IC card functions when the FOMA terminal is
turned off.
Note
• When removing the battery pack, the IC card function is
disabled regardless of the IC card lock setting.
• While the IC card lock is activated, downloading, upgrading, or
deleting operation may be unavailable depending on Osaifu-
Keitai compatible i-αppli.