Docomo L-06A Prime Series, Instruction Manual

Page: 543 / 553

AT Commands Overview Parameters/Descriptions
Command
Examples
AT+CPAS Display whether the
control signals to the
FOMA terminal are
available. Result format :
＋CPAS:<pas>
pas
0: Control signals can be
exchanged with the FOMA
terminal AT+CPAS
＋CPAS:0
AT+CPIN="<pin>"
[,"<newpin>"] Enter the PIN code to
the FOMA terminal. Enter the PIN1/PIN2/PUK
Code.
AT+CPIN?
: Display the status of the
PIN1 or PIN2 code. For the
result code, see P31.
* PIN can be authenticated
with AT+CPIN, however, it
will not appear on the FOMA
terminal. Be aware of this.
AT+CPIN?
+CPIN：SIM PIN
OK
("1234" is entered
for the PIN1 or
PIN2 Code.)
AT+CPIN="1234"
OK
("12345678" is
entered for the
PUK Code, and
"1234" for the
new PIN1 or PIN2
Code.)
AT+CPIN="123
45678","1234"
OK
AT+CPUC="<curr
ency>","<ppu>"[,"
<Passwd>"] Rewrite the currency
table on the UIM. passwd : PIN2 code
* If a wrong PIN2 code is
entered, "ERROR" appears.
AT+CPUC?
: Display the current setting
value.
("1234" is entered
for the PIN2 code)
AT+CPUC
="YEN","0.2","12
34"
OK
AT+CPUC?
+CPUC:"YEN",
"0.2"
OK
AT+CPUC =?
OK
AT+CREG=<n> Set whether a result will
be displayed regarding
the terminal is in or
out of service area.
(Depending on the
operating system of
the PC, this may not be
available). n=0 : Not notified (default)
n=1 : Notified
Notify when switching in
or out of service area.
AT+CREG?
: Display the current status.
Result format:
+CREG:<n>,<stat>
n: Display the current setting
value for whether a
notification is sent.
stat=0 : Out of the voice
service area
stat=1 : Within the voice
service area
stat=4 : Unknown
stat=5 : Within the voice
service area (while
roaming)
AT+CREG=1
OK
(Set to notification)
AT+CREG?
+CREG:1,0
OK
(When out of
service area)
+CREG:1
(When you move
into the service
area)
Continue on the next page