Docomo L-06A Prime Series, Instruction Manual

Page: 305 / 553

0
Data Management
[Sketch]
Draw lines or characters.
• Press
M
[Menu] to change "Pen/Eraser height" or "Pen color".
Select "Eraser height" from "Pen/Eraser height" to erase a drawing
where traced with a finger, etc.
[Insert]
Add a frame, stamp, or text.
Frame : Add a frame to an image.
▶ Move the cursor to a folder ▶
C
[Open] ▶ Select a
frame
• After selecting a frame, press
M
[Menu] to select
"Change frame" or "Rotate".
Stamp : Add a stamp to an image.→P304
Text : Add text to an image.→P305
[Retouch]
Change the brightness, contrast, or color tone of an image.
▶ Use
J
to switch to the item to retouch ▶
C
[Select]
• Adjust the item with
J
.
• If selecting "Auto level" or "Auto enhance", the image is adjusted
automatically.
• If selecting "Color adjust" or "Level adjust", adjust each color with
K
.
• Pressing
M
[List] also enables you to select the item to retouch.
[Effect]
Set special effects to an image.
▶ Use
J
to switch to the item to retouch ▶
C
[Select]
• Depending on items, adjust with
J
.
• If selecting "Rotation" or "Spotlight", adjust each item with
K
.
• Pressing
M
[List] also enables you to select the item to set.
[Send via mail]
Create i-mode mail with the edited image attached.
[Undo]
Cancel the performed edit operation and restore the previous state.
c
C
[OK]
• Press
I
[Cancel] to cancel editing.
d
C
[Save]
• Press
I
[Undo] to return to the state before editing.
e
"New file"/"Original file"
New file : Save the edited image as a new image.
Original file : Save the edited image over the source image.
Note
<Frame>
• Available frame size: CIF (352×288), Wallpaper (800×480),
Wallpaper (400×240), QVGA (320×240), QCIF (176×144),
and Sub-QCIF (128×96).
• Only the frame size that is same as the source image size can
be set.
Changing Image Size
a
Still image edit screen (P302) ▶
M
[Menu] ▶
"Resize"
b
Select an image size
c
C
[OK]
Go to Step 4 in "Editing Still Images" (P303).
Continued on next page