Docomo L-06A Prime Series, Instruction Manual

Page: 286 / 553

i-αppli
You can search your desired programs by keyword such
as genre or your favorite actor/actress names or pick-
up-keyword on top of the main screen. You can use this
application as remote controllers for televisions, video
players, or DVD players. (Not all devices are supported.)
• For the first time use, you need to configure the settings and agree
to the license agreement.
• Packet communication charges apply.
• For overseas use, set "Set Date&Time" of the FOMA terminal to
Japan time.
• For details about G-GUIDE Program List Remote Controller, see
"Mobile Phone User's Guide [i-mode] FOMA version".
b
Setting a timer for watching 1Seg program
You can select a program to watch from the program list of
this application and set a timer for watching the program.
Setting a timer for watching a program:
Activate this application, select a program to set a timer for,
and select "予約実行 (Set)" from "視聴予約 (Set timer)" of the
menu. After the timer setting screen appears, follow on-screen
instructions to set a timer.
b
Setting recording schedule function remotely
If your DVD recorder supports remote programming, you can
use this application via the Internet to set the recorder timer
remotely to record a TV program from the TV program time
table of this application.
The initial setting is required to enable the remote
programming function.
Making the initial setting:
a
Setup your DVD recorder for the Internet connection (Refer to the
instruction manual of your DVD recorder for the setting procedure).
b
Activate this application, select "リモート録画予約 (Remote record
schedule)" from the menu. Follow the displayed guidance to
complete the initial setting.
Setting TV program recording schedule:
Select a program to be recorded from the TV program
schedule, and select "リモート録画予約 (Remote record
schedule)" from the menu. Your DVD recorder designated
by the initial setting can be programmed via the Internet to
schedule recording the selected program.
• Packet communication charges apply.
Starting i-αppli Automatically
• Date and Time have to be set in advance to start an i-αppli
automatically.→P53
Auto start set
Setting Software Auto-start
You can set whether to start a software automatically.
a
M
▶ "i-αppli" ▶ "i-αppli settings" ▶
"Auto start set" ▶ "ON"/"OFF"
Auto start time
Setting Start Date/Time
Set the date and time when the software starts
automatically. This option can be set for up to 3 software.
a
Software list screen (P275) ▶ Move the cursor
to a software ▶
M
[Menu] ▶ "Auto start time"
▶ Perform the following operations
[Time interval set]
Start a software automatically with set intervals.
[Start time set]
Mark this if you set the time when an i-αppli automatically start.
[Time] *
Set the time and date for auto start.