DigiDesign Pro Tools, Reference Manual

Page: 344 / 886

Pro Tools Reference Guide 330
Punching In on Multiple Tracks
To punch in on multiple tracks simultaneously:
1
Enable DestructivePunch mode (“Enabling
DestructivePunch Mode” on page 326).
2
Click the Record Enable button on each track
you want to punch in, so that the track is both
DestructivePunch-enabled and Record-enabled.
Each track’s Record Enable button flashes blue
and red.
3
Click Play in the Transport to begin playback.
4
During playback, click Record in the Transport
to punch in and out on all DestructivePunch-
enabled tracks simultaneously.
5
Stop playback. When you are finished with
the record pass, track Record Enable status and
transport Record Arm status follow the current
Audio Track RecordLock and Transport Record-
Lock preference settings.
Starting Recording Immediately on
Multiple Tracks
To punch in on multiple tracks:
1
Enable DestructivePunch mode (“Enabling
DestructivePunch Mode” on page 326).
2
Click the Record Enable button on each track
you want to punch in, so that the track is both
DestructivePunch-enabled and Record-enabled.
Each track’s Record Enable button flashes blue
and red.
3
Click Record in the Transport to enter Record
Ready mode. The Record button flashes blue
and red.
4
Click Play in the Transport to begin playback.
5
During playback, punch out and back in on
individual DestructivePunch-enabled tracks by
clicking their respective Record Enable buttons.
6
Stop playback. When you are finished with
the record pass, track Record Enable status and
transport Record Arm status follow the current
Audio Track RecordLock and Transport Record-
Lock preference settings.