Delta VFD-ED Series, User Manual

Page: 271 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-60

Time Interval between Retries
Control Mode VF VFPG SVC FOCPG FOCPM Default: 10.0
Settings 0.5–600.0 sec.
 Determines the time interval between retries when the following faults occur:
7: Over-voltage during acceleration (ovA)
8: Over-voltage during deceleration (ovd)
9: Over-voltage during constant speed (ovn)
10: Over-voltage at stop (ovS)
11: Low voltage during acceleration (LvA)
12: Low voltage during deceleration (Lvd)
13: Low voltage during constant speed (Lvn)
14: Low voltage at stop (LvS)
15: Input Phase loss (PHL)
DC Breaking
Malfunction
Pr06-52
Time interval of ttempting to econnect while malfunction
a r
Pr02-11~Pr02-16: MO
#46: Malfunction Indication
RUN command (forward/reversly)
MI1 =40: Enable the motor drive
MO#12: Release the mechnical brake
MO #46: Attempting to reconnect while malfunction
Auto Reset -
DC Breaking
Frequency Command when the Most Recent Fault Occurred
Control Mode VF VFPG SVC FOCPG FOCPM Default: Read only
Settings 0.00–655.35 Hz
Output Frequency when the Most Recent Fault Occurred
Control Mode
VF VFPG SVC FOCPG FOCPM
Default: Read only
Settings 0.00–655.35 Hz
Output Current when the Most Recent Fault Occurred
Control Mode VF VFPG SVC FOCPG FOCPM Default : Read only
Settings 0.00–655.35 Amps
Motor Frequency when the Most Recent Fault Occurred
Control Mode VF VFPG SVC FOCPG FOCPM Default : Read only
Settings 0.00–655.35 Hz
Output Voltage when the Most Recent Fault Occurred
Control Mode
VF VFPG SVC FOCPG FOCPM
Default: Read only
Settings 0.0–6553.5 V
DC Bus Voltage when the Most Recent Fault Occurred
Control Mode VF VFPG SVC FOCPG FOCPM Default : Read only
Settings 0.0–6553.5 V