Delta VFD-ED Series, User Manual

Page: 137 / 389

Ch09 Digital Keypad | VFD-ED
9-10
Press Up or Down to select the next fault record.
After selecting a fault record, press ENTER to see
that fault record’s details.
Press Up or Down to see the fault record’s details
such as date, time, frequency, current, voltage, and
DC bus voltage.
NOTE
The AC motor drive fault actions are recorded and saved to the KPC-CC01.
When you remove the KPC-CC01 and connect it to another AC motor
drive, the previous fault records are not deleted. The new fault records of
the new AC motor drive continue to be added to the KPC-CC01.
5. Display Setup
Press ENTER to display the
Display Setup screen.
1. Contrast
Press Up or Down to adjust the setting
value.
For example, increase the contrast to +10.
After you set the value, press ENTER to
see the screen display after increasing the
contrast.
Then press ENTER and decrease the
contrast to -10.
Press ENTER to see the screen display
after adjusting the contrast to -10.
2. Back-Light
Press ENTER to go to Back-Light time
setting screen.
Press Up or Down to adjust the setting
value.
When the setting value is 0 Min, the
backlight stays on.