Delta VFD-ED Series, User Manual

Page: 222 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-11

JOG Acceleration Time

JOG Deceleration Time
Control Mode VF VFPG SVC FOCPG FOCPM Default: 1.00
Settings 0.00–600.00 sec.
 You can use both the external terminal JOG and the JOG key on the keypad. When the JOG command is
ON, the AC motor drive accelerates from the fourth output voltage setting (Pr.01-07) to the JOG
frequency (Pr.01-22). When the JOG command is OFF, the AC motor drive decelerates from the JOG
frequency to zero. The Acceleration and Deceleration time are set by these parameters (Pr.01-20,
Pr.01-21).
 You cannot execute the JOG command when the AC motor drive is running. When the JOG command is
running, other operation commands are invalid except the Forward and Reverse commands.
F requenc y
Time
01-22
JO G fr equency
01-07
4th output
frequency
setting
01-20
01-21
JO G ac celeration time
JO G dec el er ation time
JO G ac cel./dec el . time
 JOG Frequency
Control Mode VF
VFPG SVC FOCPG FOCPM Default: 6.00
Settings 0.00–400.00 Hz
 You can use both the external terminal JOG and the JOG key on PU. When the JOG terminal is disabled,
the AC motor drive accelerates from 0 Hz to the JOG frequency (Pr.01-22). When the JOG terminal is
enabled, the AC motor drive decelerates from the JOG frequency to zero. The Acceleration and
Deceleration time are set by these parameters (Pr.01-20, Pr.01-21). You cannot execute the JOG
command when the AC motor drive is running. When the JOG command is running, other operation
commands are invalid except the Forward and Reverse commands and the STOP key on the digital
keypad.