Delta VFD-ED Series, User Manual

Page: 236 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-25
23: Over-voltage stall prevention warning ○ ○ ○ ○ ○
24: Operation mode indication (Pr.00-15=1) ○ ○ ○ ○ ○
25: Forward command ○ ○ ○ ○ ○
26: Reverse command ○ ○ ○ ○ ○
27: Output when current
≥
Pr.02-33 ○ ○ ○ ○ ○
28: Output when current < Pr.02-33 ○ ○ ○ ○ ○
29: Output when frequency
≥
Pr.02-34 ○ ○ ○ ○ ○
30: Output when frequency < Pr.02-34 ○ ○ ○ ○ ○
31: Power generation direction and status
verification
○ ○ ○ ○ ○
32: Power generation direction ○ ○ ○ ○ ○
33: Zero speed (actual output frequency) ○ ○ ○ ○ ○
34: Zero speed with Stop (actual output frequency) ○ ○ ○ ○ ○
35: Fault output option 1 (Pr.06-22) ○ ○ ○ ○ ○
36: Fault output option 2 (Pr.06-23) ○ ○ ○ ○ ○
37: Fault output option 3 (Pr.06-24) ○ ○ ○ ○ ○
38: Fault output option 4 (Pr.06-25) ○ ○ ○ ○ ○
39: Reserved
40: Speed reached (including zero speed) ○ ○ ○ ○ ○
41: Reserved
42: STO Output Error
○ ○ ○ ○ ○
43–44: Direct Docking Mode only
45: Reserved
46: Retrying after a fault has occurred indication
○ ○ ○ ○ ○
47: Direct Docking Mode only
48: Control output of MPSCC (Motor Phase Short
Circuit Contactor)
○ ○ ○ ○ ○
49: Emergency power mode action ○ ○ ○ ○ ○
Settings Functions Descriptions
0 No function MO has no function
1 Indication during operation Active when there is an output from the drive or RUN command is ON.
2
Operation speed reached Active when the AC motor drive reaches the output frequency setting.
3
Desired frequency 1 reached
(Pr.02-25, 02-26)
Active when the desired frequency (Pr.02-25, 02-26) reached.
4
Desired frequency 2 reached
(Pr.02-27, 02-28)
Active when the desired frequency (Pr.02-27, 02-28) reached.
5
Zero Speed
(Frequency command)
Active when the Frequency command = 0. (the drive should be at RUN
mode)
6
Zero Speed with stop
(Frequency command)
Active when Frequency command = 0 or Stop.