Delta VFD-ED Series, User Manual

Page: 293 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-82

Response Delay Time
Control Mode VF VFPG SVC FOCPG FOCPM Default: 2.0
Settings 0.0–200.0 ms
 If the host computer does not finish the transmitting/receiving process, you can use this parameter to set
the response delay time after the AC motor drive receives communication command as shown in the
following picture.
PC or PLC command
Handling time
of the AC drive
Response Delay Time
Response Message
of the AC Drive
RS-485 BUS
–
Direct docking mode only
Control Mode VF VFPG SVC FOCPG FOCPM Default: -
Settings Contact Delta for more information
PDO Transmission Interval
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0
Settings 0–65535 ms