Delta VFD-ED Series, User Manual

Page: 387 / 389

Appendix B. Revision History

VFD-ED
B-14
Section Subject
Revision /
Addition /
Deletion
Previous Revision Latest Change
Pr.02-23 table due to the
change of Pr.02-
17–Pr.02-20 bit9 from bit6 to bit9
11 & 12
Pr.03-15 New parameter Addition Reserved Load Compensation
Auto-tuning
(See manual for details)
12 Pr.05-00
Motor
Auto-tuning Update parameter
descriptions Revision See manual for details:
FW Version: V1.07
Issued Edition: V02 See manual for details:
FW Version: V1.09
Issued Edition: V01
11 & 12
Pr.05-01 Revise the
parameter name
and its description Revision Motor Full-load Current
(See manual for details) Motor Rated Current
(See manual for details)
11 & 12
Pr.05-10 Revise the
parameter name Revision Torque Compensation
Time Constant
Torque Compensation
Low Pass Filter Time
11 & 12
Pr.05-11 Revise the
parameter name Revision Slip Compensation
Time Constant
Slip Compensation Low
Pass Filter Time
11 & 12
Pr.06-31 Revise the default
setting value Revision 0 1
11 & 12
Control modes Delete all
“TQCPG” control
mode Deletion TQCPG control mode Delete “TQCPG”
control mode
11 & 12
Pr.06-44 Revise the default
setting value Revision 0.00 Read only
12
Pr.06-48 Revise the
formula in the
parameter
description Revision
11 & 12 & 16-4
Pr.06-49 Revise:
1. Default setting
value and
setting range
(Ch11+Ch12)
2. Parameter
description
(Ch12)
Revision See manual for details:
FW Version: V1.07
Issued Edition: V02 See manual for details:
FW Version: V1.09
Issued Edition: V01
11 & 12
Pr.07-01 New parameter Addition Reserved Brake Transistor
Hysteresis Voltage
(See manual for details)
12 Pr.08-00
Motor
Auto-tuning Update parameter
descriptions Revision See manual for details:
FW Version: V1.07
Issued Edition: V02 See manual for details:
FW Version: V1.09
Issued Edition: V01
11 & 12
Pr.08-01 Revise the
parameter name
and its description Revision Motor Full-load Current
(See manual for details) Motor Rated Current
(See manual for details)
11 & 12
Pr.10-01 Revise the
parameter name Revision Encoder Pulse Encoder PPR
11 & 12
Pr.11-02 Revise the
parameter name Revision Sheave Diameter Traction Sheave
Diameter
11 & 12
Pr.11-03 Revise the
parameter name Revision Mechanical Gear Ratio Gear Ratio
11 & 12
Pr.11-05 Revise the
parameter name Revision Inertial Ratio Mechanical Inertial
Ratio
11 & 12
Pr.12-31 Revise the default
setting value Revision 0 1561
11 & 12 Revise the Revision 1. Pr.13-30 No Default 1. Pr.13-00 AC Motor