Delta VFD-ED Series, User Manual

Page: 100 / 389

06 Optional Accessories | VFD-ED
6-49
6-7 Digital Keypad
KPC-CC01
F: Frequency Command
H: Output Frequency
U: User Defined Units
ERR: CAN Error Indicator
RUN: CAN Run Indicator
: Status Indicator
A
: LED Display
Display frequency, current, voltage and error etc.
C
: Function
(Refer to the chart follows for detail description)
Keypad Functions
Key Description
ESC
ESC Key
Press the ESC key to return to the previous page, or return to the last category in the sub-menu.
MENU
Menu Key
Press the MENU key to the main menu.
Menu items:
1. Parameter Setup
2. Copy Parameter
3. Keypad Locked
4. PLC Function 5. Copy PLC
6. Fault Record
7. Quick Start
8. Display Setup 9. Time Setup
10. Language Setup
11. Start-up
12. Main Page 13. PLC Link
VFD-ED does not support menu item 4 and 5 (PLC functions) and menu item 7 (Quick Start).
ENTER
ENTER Key
Press the ENTER key to go to the next menu level. If you are at the last level, then press ENTER to
execute the command.
HAND
No function
AUTO
No function
FWD/REV Operation Direction Key
 The FWD/REV key controls the operation direction but does NOT activate the drive. FWD:
forward, REV: reverse.
 The drive operates in the direction as shown by the LED.
RUN
Start Key
 This button is functional only when the keypad is the source of the command.
 This button causes the motor drive to run according to its settings. See “Description of LED
Functions” for LED status.
 Pressing the RUN button repeatedly is allowed while the motor drive is stopping.
 If HAND mode is ON, the RUN key is valid only when the HAND mode operation source is digital
keypad for parameter settings.
STOP
Stop Key
 The STOP key has the highest priority in command.
 Press the STOP key to stop the drive under any conditions.
 Press the RESET key to reset the drive when faults occur. If the RESET key does not respond, go
to MENU  Fault Records to check the most recent fault.