Delta VFD-ED Series, User Manual

Page: 182 / 389

Ch11 Summary of Parameter Settings | VFD-ED
11-1
Chapter 11 Summary of Parameter Settings
This chapter provides a summary of parameter settings including the ranges and defaults that help you set the
parameters. You can set, change, and reset the parameters with the digital keypad.
NOTE
1)

: Indicates a parameter that you can set during operation.
2) For more details on parameters, refer to Chapter 12 Descriptions of Parameter Settings.
3)
◆
indicates that the parameters or the setting values only apply on the Direct Docking Mode. The actual
functions of each elevator controller vary from one to another. For more information, please contact Delta.
4) The parameters described in this user manual are designed for multi-step speed mode. The defaults for direct
docking mode are different from the defaults described in this user manual. If you need to use the direct
docking mode, contact Delta for more information.
00 Drive Parameters

: You can set this parameter during operation.
NOTE
IM: Induction Motor; PM: Permanent Magnet Motor
Pr. Parameter Name Setting Range Default
VF VFPG SVC FOCPG FOCPM
00-00 AC Motor Drive Identity
Code
108: 220 V, 2.2 kW, 3 HP (single-phase)
110: 220 V, 3.7 kW, 5 HP (single-phase)
10: 230V, 4.0 kW, 5 HP
11: 460V, 4.0 kW, 5 HP
12: 230V, 5.5 kW, 7.5 HP
13: 460V, 5.5 kW, 7.5 HP
14: 230V, 7.5 kW, 10 HP
15: 460V, 7.5 kW, 10 HP
16: 230V, 11 kW, 15 HP
17: 460V, 11 kW, 15 HP
18: 230V, 15 kW, 20 HP
19: 460V, 15 kW, 20 HP
20: 230V, 18.5 kW, 25 HP
21: 460V, 18.5 kW, 25 HP
22: 230V, 22 kW, 30 HP
23: 460V, 22 kW, 30 HP
24: 230V, 30 kW, 40 HP
25: 460V, 30 kW, 40 HP
26: 230V, 37 kW, 50 HP
27: 460V, 37 kW, 50 HP
29: 460V, 45 kW, 60 HP
31: 460V, 55 kW, 75 HP
33: 460V, 75 kW, 100 HP
Read Only
○ ○ ○ ○ ○
00-01 AC Motor Drive Rated
Current Display
Display by model Read only
○ ○ ○ ○ ○
00-02 Parameter Reset 0: No function 0
○ ○ ○ ○ ○