Delta VFD-ED Series, User Manual

Page: 198 / 389

Ch11 Summary of Parameter Settings | VFD-ED
11-17
Pr. Parameter Name Setting Range Default
VF VFPG SVC FOCPG FOCPM
39: GFF(ground fault) hardware error
(Hd3)
40: Auto-tuning error on motor’s
parameter (AUE)
41: Reserved
42: PG feedback error (PGF1)
43: PG feedback loss (PGF2)
44: PG feedback stall (PGF3)
45: PG slip error (PGF4)
46: Reserved
47: Reserved
48: Reserved
49: External fault input (EF)
50: Emergency stop from external
terminals (EF1)
51: Reserved
52: Password error after three attempts
(Pcod)
53: Reserved
54: Illegal communication command
(cE01)
55: Illegal communication address (cE02)
56: Communication data length error
(cE03)
57: Communication attempts to write to a
read-only address (cE04)
58: Modbus transmission time-out (cE10)
59: Keypad transmission time-out (cP10)
60: Brake transistor error (BF)
61
– 63: Reserved
64: Mechanical brake feedback error
(MBF)
65: PGF5 hardware error
66: Magnetic contactor error (MCF)
67: Output phase loss (MPHL)
68: CAN BUS disconnected
69–71: Reserved
72: Safe torque loss (STL1)
73: PGcd hardware error
74: PG absolute signal error (PGHL)
75: PG Z phase signal loss (PGAF)
76: Safe torque output stops (STO)
77: Safe torque loss 2 (STL2)
78: Safe torque loss 3 (STL3)
*The definition of codes #69–#71 has
been modified in v1.04. See Chapter 14
for more information.

06-22 Fault Output Option 1 0–65535 (refer to bit table for fault code)
0
○ ○ ○ ○ ○

06-23 Fault Output Option 2 0–65535 (refer to bit table for fault code)
0
○ ○ ○ ○ ○

06-24 Fault Output Option 3 0–65535 (refer to bit table for fault code)
0
○ ○ ○ ○ ○

06-25 Fault Output Option 4 0–65535 (refer to bit table for fault code)
0
○ ○ ○ ○ ○

06-26 PTC (Positive
Temperature
Coefficient) Detection
Action 0: Warn and keep operation
1: Fault and ramp to stop
0
○ ○ ○ ○ ○

06-27 PTC Level
0.0–100.0% 50.0
○ ○ ○ ○ ○

06-28 PTC Detection Filter
Time
0.00–10.00 sec. 0.20
○ ○ ○ ○ ○