Delta VFD-ED Series, User Manual

Page: 197 / 389

Ch11 Summary of Parameter Settings | VFD-ED
11-16
Pr. Parameter Name Setting Range Default
VF VFPG SVC FOCPG FOCPM

06-11 Current Limit
0–250% (rated current of the motor drive) 200
○ ○
06-12 Electronic Thermal
Relay
0: Standard motor
1: Inverter motor
2: Disabled 2
○ ○ ○ ○ ○

06-13 Electronic Thermal
Characteristic
30.0–600.0 sec. 60.0
○ ○ ○ ○ ○

06-14 Heat Sink Overheat
(OH) Warning
0.0–110.0°C 90.0
○ ○ ○ ○ ○

06-15 Stall Prevention Limit
Level
0–100% (refer to Pr.06-02, Pr.06-03) 50
○ ○ ○
06-16 Present Fault Record 0: No fault 0
○ ○ ○ ○ ○
06-17 Second Most Recent
Fault Record
1: Over-current during acceleration (ocA) 0
○ ○ ○ ○ ○
06-18 Third Most Recent Fault
Record
2: Over-current during deceleration (ocd)
0
○ ○ ○ ○ ○
06-19 Fourth Most Recent
Fault Record
3: Over-current during constant speed
(ocn) 0
○ ○ ○ ○ ○
06-20 Fifth Most Recent Fault
Record
4: Ground fault (GFF) 0
○ ○ ○ ○ ○
06-21 Sixth Most Recent Fault
Record
5: IGBT short-circuit (occ)
6: Over-current at stop (ocS)
7: Over-voltage during acceleration (ovA)
8: Over-voltage during deceleration (ovd)
9: Over-voltage during constant speed
(ovn)
10: Over-voltage at stop (ovS)
11: Low voltage during acceleration (LvA)
12: Low voltage during deceleration (Lvd)
13: Low voltage during constant speed
(Lvn)
14: Low voltage at stop (LvS)
15: Input phase loss (PHL)
16: IGBT overheat (oH1)
17: Bulk capacitors overheat (oH2)
18: Abnormal IGBT temperature detected
(tH1o)
19: Abnormal bulk capacitor temperature
detected (tH2o)
20:Unusal cooling fan operation (FAn)
21: Overload (oL) (150%; 1 minute, motor
drive overloaded)
22: Motor overloaded (EoL1)
23: Reserved
24: Motor PTC overheat (oH3)
25: Reserved
26: Over-torque 1 (ot1)
27: Over-torque 2 (ot2)
28: Reserved
29: Reserved
30: Memory writing error (cF1)
31: Memory reading error (cF2)
32: Isum current detection error (cd0)
33: U-phase current detection error (cd1)
34: V-phase current detection error (cd2)
35: W-phase current detection error (cd3)
36: CC current clamp hardware error
(Hd0)
37: OC (over-current) hardware error
(Hd1)
38: ov (over-voltage hardware error (Hd2)
0
○ ○ ○ ○ ○