Delta VFD-ED Series, User Manual

Page: 188 / 389

Ch11 Summary of Parameter Settings | VFD-ED
11-7
02 Digital Input / Output Parameters

: You can set this parameter during operation.
Pr. Parameter Name Setting Range Default
VF VFPG SVC FOCPG FOCPM
02-00 Two-wire/three-wire
Operation Control
0: FWD/STOP, REV/STOP
1: FWD/STOP, REV/STOP
(Line Start Lockout)
2: RUN/STOP, REV/FWD
3: RUN/STOP, REV/FWD
(Line Start Lockout)
4: Three-wire
5: Three-wire (Line Start Lockout)
0
○ ○ ○ ○ ○
02-01 Multi-Function Input
Command 1 (MI1)
0: no function
1
○ ○ ○ ○ ○
(The Stop terminal for
three-wire operation)
1: multi-step speed command 1
○ ○ ○ ○ ○
02-02 Multi-Function Input
Command 2 (MI2)
2: multi-step speed command 2
2
○ ○ ○ ○ ○
02-03 Multi-Function Input
Command 3 (MI3)
3: multi-step speed command 3
3
○ ○ ○ ○ ○
02-04 Multi-Function Input
Command 4 (MI4)
4: multi-step speed command 4
4
○ ○ ○ ○ ○
02-05 Multi-Function Input
Command 5 (MI5)
5: Reset
0
○ ○ ○ ○ ○
02-06 Multi-Function Input
Command 6 (MI6)
6: JOG command
0
○ ○ ○ ○ ○
02-07 Multi-Function Input
Command 7 (MI7)
7: Acceleration/ deceleration speed
inhibit
0
○ ○ ○ ○ ○
02-08 Multi-Function Input
Command 8 (MI8)
(Enable Drive terminal)
8: First, second
acceleration/deceleration time
40
○ ○ ○ ○ ○
9: Third, fourth acceleration/deceleration
time
○ ○ ○ ○ ○
10: EF input (Pr.07-28)
○ ○ ○ ○ ○
11: Reserved
12: Stop output
○ ○ ○ ○ ○
13–14: Reserved
15: AUI1 operation speed command
○ ○ ○ ○ ○
16: Reserved
17: AUI2 operation speed command
○ ○ ○ ○ ○
18: Emergency Stop (Pr.07-28)
○ ○ ○ ○ ○
19–23: Reserved
24: FWD JOG command
○ ○ ○ ○ ○
25: REV JOG command
○ ○ ○ ○ ○
26: Reserved
27: ASR1/ASR2 selection
○ ○ ○ ○ ○
28: Emergency stop (EF1)
(Motor coasts to stop)
○ ○ ○ ○ ○
29–30: Reserved
31: High torque bias (according to
Pr.07-21)
○ ○ ○ ○ ○
32: Middle torque bias (according to
Pr.07-22)
○ ○ ○ ○ ○
33: Low torque bias (according to
Pr.07-23)
○ ○ ○ ○ ○
34–37: Reserved
38: Disable writing to EEPROM function
○ ○ ○ ○ ○
39: Torque command direction (0 is
positive direction)