Delta VFD-ED Series, User Manual

Page: 235 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-24

Multi-function Output 1: RA, RB, RC (Relay 1)
Default: 0

Multi-function Output 2: MRA, MRB, MRC (Relay 2)
Default: 0

Multi-function Output 3: R1A, R12C (Relay 3)

Multi-function Output 4: R2A, R12C (Relay 4)

Multi-function Output 5: MO1

Multi-function Output 6: MO2

Multi-function Output 7: MO3

Multi-function Output 8: MO4

Multi-function Output 9: MO5

Multi-function Output 10: MO6
Reserved
Reserved
Default: 0
Settings Control Mode
VF VFPG SVC FOCPG FOCPM
0: No function ○ ○ ○ ○ ○
1: Indication during operation ○ ○ ○ ○ ○
2: Operation speed reached ○ ○ ○ ○ ○
3: Desired frequency 1 reached (Pr.02-25,
Pr.02-26)
○ ○ ○ ○ ○
4: Desired frequency 2 reached (Pr.02-27,
Pr.02-28)
○ ○ ○ ○ ○
5: Zero Speed (Frequency command) ○ ○ ○ ○ ○
6: Zero speed with stop (Frequency command) ○ ○ ○ ○ ○
7: Over-torque (OT1) (Pr.06-05–06-07) ○ ○ ○ ○ ○
8: Over-torque (OT2) (Pr.06-08–06-10) ○ ○ ○ ○ ○
9: Drive is ready ○ ○ ○ ○ ○
10: User-defined low-voltage detection (LV) ○ ○ ○ ○ ○
11: Malfunction indication ○ ○ ○ ○ ○
12: Mechanical brake release (Pr.02-29, Pr.02-30,
Pr.02-37)
○ ○ ○ ○ ○
13: Overheat (Pr.06-14) ○ ○ ○ ○ ○
14: Brake transistor signal ○ ○ ○ ○ ○
15: Motor-controlled magnetic contactor output ○ ○ ○ ○ ○
16: Slip error (oSL) ○ ○ ○ ○ ○
17: Malfunction indication 1 ○ ○ ○ ○ ○
18: Reserved
19: Brake transistor output error ○ ○ ○ ○ ○
20: Warning output ○ ○ ○ ○ ○
21: Over-voltage warning ○ ○ ○ ○ ○
22: Over-current stall prevention warning ○ ○ ○