Dell OpenManage Network Manager Client Manual Download Page 51

Page: 51 / 388

Redcell > Database Aging Policies (DAP) | Getting Started with Dell OpenManage Network Manager

To view and manage such policies, right click an item with them (for example, an alarm), or click

Manage > Control Panel

, and under Redcell click

Database Aging Policies.

Policies appear in the

Aging Policies

tab of this screen, with columns that indicate whether the

policy is

Enabled,

the

Policy Name, Details

(description),

Scheduled Intervals

and icons triggering

three

Actions

(

Edit, Delete

and

Execute

). Notice that the bottom right corner of this page also lets

you

Enable / Disable / Execute All

policies listed.

How To:

DAP Workflow

The following are steps typical for implementing DAP:

From the screen listing Database Aging Policies (DAP), click

Add Policy

, and select a policy

from the displayed list of alternatives.

This opens Aging Policies Editor.

In the

Aging Policies > General

tab, specify the name, schedule interval, whether this policy

Enabled

, and so on.

Specify the

Archive Location

. Those listed are the

Repositories

listed on the Repositories tab.

You can manage those on that tab.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands