Dell OpenManage Network Manager Client Manual Download Page 15

Page: 15 / 388

Overview | Getting Started with Dell OpenManage Network Manager

Getting Started with Dell OpenManage

Network Manager

Overview

This chapter describes how to install and start Dell OpenManage Network Manager for basic

network monitoring and management. For more detailed descriptions of all this software’s features,

consult its other manuals (the OpenManage Network Manager Administration Section of the User

Guide,

Synergy User Guide

Administration Section

and

User Guide

) or the online help.

Tip

If you want to find something but are unsure about which manual it is in, you can search all text in the

Acrobat files in a single directory. You can also click on the blue cross-references to go to the target

destination of cross-references in Acrobat, however for such electronic cross-references to the other

documents to work, they must be in the same directory. Cross-document links do not work between

documents for different versions of this software, but may provide an approximate location to consult.

If you are sure your hardware, software and network is correct and just want to get started

immediately, go to Getting Started on page 27.
The Dell OpenManage Network Manager portal delivers powerful solutions to network problems,

and, in addition to the OpenManage Network Manager technology documented in the following

pages, Dell OpenManage Network Manager offers the following capabilities:

• Message Boards, Blogs, Wikis
• Shared Calendars
• Enterprise Chat / Messaging
• RSS Feeds
• Tagging, Ratings, Comments

The section Server on page 49 describes how to set up some of these features.

System Basics

System requirements depend on how you use the application and the operational environment.

Your specific network and devices may require something different from the recommendations for

typical installations.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands