Dell OpenManage Network Manager Client Manual Download Page 101

Page: 101 / 388

Alarms | Key Portlets

101

Configuring the Alarms Chart

Turn the chart on or off in the

Settings

screen’s

Chart

Options

panel. If no data exists for the chart and the

Chart option is on, the portlet returns to “no-chart”

mode.
When you enable the chart Filtering is disabled since the

chart, in effect, provides the filter. When the chart is

disabled then filtering options are available.
Settings are saved if you have Admin rights or the Portlet

is on your Public / Private pages (like standard behavior).

NOTE:

Changes appear after you click

Apply

. The

Filter

panel

disappears when you check the

Show Chart

checkbox.

Expanded Alarm Portlet

The expanded Alarm portlet appears when you click the plus (+) in the top right corner of the

smaller screen.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands