Dell OpenManage Network Manager Client Manual Download Page 221

Page: 221 / 388

| File Servers

221

File Servers

You must configure FTP and/or TFTP file

servers to push and pull configuration files

to and from devices, or to deploy firmware

updates. With this portlet you can switch

between internal and external file server

mode, and

Show

Hide

not applicable File

Servers depending on the file server mode

by checking/unchecking the

Show All

Servers

check box. When this is un-

checked, only the relevant file server(s)

appear onscreen.
Right clicking a file server, or the empty list

space lets you do the following:

New

—Displays the File Server Editor screen.

Edit

—Displays the selected File Server in the File Server Editor screen.

Disable

—Disables the selected file server. When file servers are disabled, they are not used in a

Backup, Restore or Deploy operation. This too appears only for External File Servers.

Enable

—Activates the selected file server. Again, exposed for External file Servers only.

Test

—Tests the selected file server by sending and retrieving a file.

Delete

—Removes the selected file server from the list. This appears for External File Servers only.

NOTE:

You can select whether Dell OpenManage Network Manager is in

Internal

External File Server Mode

with the radio buttons at the top of this portlet. Checking

Show All Servers

displays the internal file

server.

CAUTION:

Port conflicts prevent having an external file server and internal file server operate on the same machine.

Columns in this manager identify the server, and describe whether it is enabled, and has TFTP

enabled.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands