Dell OpenManage Network Manager Client Manual Download Page 116

Page: 116 / 388

116

Event Processing Rules | Key Portlets

Message Template

—The configuration of the message when sent. For example: the template

occurred on %3 for %2

creates a message with the first message pattern retrieved,

followed by the third, then the second within the specified text.

Message Test

This screen lets you test your message against the pattern and/or template. Click the

Test

button to

the right of the top field to activate this testing.

Test Message

—Enter a message to test.

Test Message Result

—The text extracted for the event as it appears in the template.

Click

Apply

to accept these escalation criteria, or

Cancel

to abandon them without saving.

Actions

This screen catalogs the actions configured for the Post-Processing (Automation) rule you have

configured in previous screens.

Click

Add Action

to create a new action in the editor. The

Actions

column lets you revise (

Edit this

entry

) or

Delete

entries in this table. Click

Save

to preserve the action(s) configured here, or

Cancel

to abandon any edits.
Clicking

Add Action

lets you select from the following:

• Forward Northbound
• Email
• Custom

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands