Dell OpenManage Network Manager Client Manual Download Page 24

Page: 24 / 388

Sizing for Standalone Installations | Getting Started with Dell OpenManage Network Manager

Fixed IP Address

OpenManage Network Manager includes a web server and application server which must be

installed to hosts with fixed IP addresses or permanently assigned Dynamic Host Control Protocol

(DHCP) leases.

If you do change your host’s IP address

To accommodate a changed IP address, first delete the contents of

\oware\temp

. Change your

local IP address anywhere it appears in

\owareapps\installprops\lib\installed.properties

. Then restart your machine.

Alternatively, in a shell, after running

oware

to set the environment, you can run

ipaddresschange -n

followed by the new IP address.

NOTE:

If you change your host’s IP address, you must also change the Virtual host IP to the new IP address in

Manage > Control Panel > Portal.

If you do change your server’s IP address, you must also change the URL for web client access in

your browser.

Authentication

For successful discovery of the resources on your network, this software requires authenticated

management access to the device. To get this access, you must provide the correct SNMP

community strings, WMI login credentials, and any other command-line (Telnet / SSH) or browser

(HTTP/HTTPS) authentication, and SNMP must be turned on, if that is not the device’s default.

Some devices require pre-configuration to recognize this management software. Consult your

network administrator or the device’s manuals for instructions about how to enable those. See

Authentication on page 143 for more.

Supported PowerConnect Models

Refer to release notes for a list of supported devices. You can also look at the HTML files in the

SupportedDevices directory of your installation source for information about supported devices

and operating systems.

Windows Management Interface

The Windows Management driver currently supports any Windows based operating system that

supports the Windows Management Interface (WMI).
Windows Management is always installed on the following operating systems (or later):

• Windows XP Professional (with a browser other than Internet Explorer)

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands