Dell OpenManage Network Manager Client Manual Download Page 26

Page: 26 / 388

Sizing for Standalone Installations | Getting Started with Dell OpenManage Network Manager

• Permit incoming traffic from all clients to the TCP ports (and UDP ports, if necessary) on

your server in the Ports range(s) specified above.

• If you are using callbacks, permit incoming traffic on all ports where the TCP connection was

initiated by your server.”

WMI queries will succeed only if you add the User account to local admin group. Refer to the

Microsoft knowledgebase articles for the way to do this. For example: Leverage Group Policies with

WMI Filters: support.microsoft.com/kb/555253/en-us
For user rights for WMI access, see: www.mcse.ms/archive68-2005541196.html
See also:

Service overview and network port requirements for the Windows Server system

(support.microsoft.com/kb/832017/)

Web-Based Enterprise Management (WBEM) Driver

The Web-Based Enterprise Management driver currently supports operating systems supporting

the Web-Based Enterprise Management interface (WBEM).
WBEM is always installed on the following operating systems versions (and later):

• Red Hat Linux 5.5 or 6.0
• VM Ware (ESX) with WBEM installed.

You can install Web-Based Enterprise Management on some other systems if they do not already

use it, but monitored devices must have this installed.

NOTE:

To verify WBEM is running on your system, run the following command:

ps-e | grep cim

. You

should see a process labelled

cimserver

Installing WBEM on Red Hat

For Red Hat 5, the latest supported release for WBEM is

tog-pegasus-2.7.0-

2.el5_2.1.i386.rpm

and this is what you need to download once you have logged into the

Red Hat network.
Install this as follows:
Install:

rpm -ih tog-pegasus-2.7.0-2.el5_2.1.i386.rpm

Upgrade:

rpm -Uh tog-pegasus-2.7.0-2.el5_2.1.i386.rpm

To determine if wbem is running, run

ps -ef | grep cimserver

in a shell.

To start | stop | get status of the WBEM service:

tog-pegasus start | stop | status"

If the system is running Fedora, then you can access tog-pegasus updates at this site:

admin.fedoraproject.org/pkgdb/packages/name/tog-pegasus

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands