Dell OpenManage Network Manager Client Manual Download Page 333

Page: 333 / 388

333

Storage Arrays

Introducing Storage Arrays

This chapter describes Storage Arrays as they appears in Dell OpenManage Network Manager’s web

portal. These appear in the portlet described in Managed Resources on page 166, as well as the

Storage Array Portlet, which offers storage-array-specific capabilities. The following sections

describe these capabilities.
Storage arrays appear in the Storage Array Portlet when they are discovered. See Resource

Discovery on page 152 for a description of that process.

Storage Array Portlet

This portlet lets you manage storage arrays on your network.

The summary portlet displays columns describing the listed arrays’

Status, Equipment Name, IP

Address, Vendor,

and

Capacity.

The following menu items are available from right-clicking in the portlet:

Edit

—Select from the General, Authentication or Management Interface editors in the sub-

menu. For information about the last two, see Managed Resources on page 166.

Details

—This opens a screen for the selected storage array like the one described in Equipment

Details on page 178.

Resync

—Updates Dell OpenManage Network Manager with the latest information from the

device.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands