Dell OpenManage Network Manager Client Manual Download Page 279

Page: 279 / 388

Dashboard Views | Monitoring

279

The icons in the dashboard’s upper right corner let you edit

Dashboard Properties

with the

Dashboard Editor, or

Save

the dashboard with the other icon.

Tip

Hovering the cursor over the individual charts displays the charted attribute value(s) as popup tooltips. If

a graph has multiple lines, the data points for different lines are charted at different times (Dell

OpenManage Network Manager distributes polling to balance the load on its mediation service). Hover

the cursor over the time when a line’s data point appears, and that line’s value appears as a tooltip. It may

seem a device reporting the same value as others is not graphed properly, but mousing over the graph

displays the value.

How To:

Create a Simple Dashboard View

Follow these steps to create a simple dashboard view. See How to:

Create a Custom Dashboard

View

on page 282 for more complex monitor creation.

In the Dashboard Views portlet, right click to select

New > Simple Dashboard.

Select a name (for example SNMP Interface, to display the monitor configured in How

to:

Create an SNMP Interface Monitor

on page 262).

Click

Add Entity

in the Entities panel.

In the filter that appears, select the type: Interface.

Filter for the IP address of the entity monitored in the previous SNMP interface monitor

creation, select it and click

Add Selection

and

Done.

Select the ifInErrors attribute, and click the right arrow in the Dashboard View Attributes

panel.

Click

Save

. The dashboard view you have configured should appear in the portlet.

To launch it, right-click and either

Launch (Popup)

Launch (Maximize)

If you want to convert this simple dashboard to a custom dashboard so you can alter it further,

right-click and click

Convert.

Performance Dashboard

This portlet lets you install and configure Dashboard Views as permanent displays rather than

portlets. When you initially install this portlet, it appears empty. The message “No Dashboard View

has been set:” appears with a

Select

button. Click that button to open the Dashboard View

Selection screen.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands