Dell OpenManage Network Manager Client Manual Download Page 25 | Manualshive

Page: 25 / 388

background image

Sizing for Standalone Installations | Getting Started with Dell OpenManage Network Manager

25

• Windows 2003 All Editions
• Windows Vista

The login credentials must be for an administrator on the installation host for complete

functionality. Both this and .NET installation are requirements for any installation managing

devices supported by this driver.
This driver supports global group operations.

NOTE:

Discovery may display benign retry warning messages in the application server shell or log. You can

safely ignore these.

Prerequisites

Before installing this software to manage other computers with a Windows Management Interface

driver (assuming you are installing that driver), if you do not already have it installed, you must

download and install the Microsoft .Net framework version 3.0 or later on the application server.

For complete functionality, the WMI login for this software must be a login for a domain user who

also belongs to the administrator group on the WMI device. Both are requirements for any

installation managing WMI devices.
The following are common Windows Base prerequisites:

Credentials

—You must use administrative credentials to manage the computer system.

Firewall

— Some firewalls installed on the computer may block Windows Management requests.

Allow those you want to manage. (See Firewall Issues below.)

License

—Make sure you have the proper Windows Base driver license installed. If you have a Dell-

only license and are discovering a non-Dell computer, discovery does not work. Or if you have

a Dell license for desktop discover you cannot discover a server.
License come in the following types:

•  Major Vendor by Name—For example: Dell, Compaq, HP, Gateway
•  Server/Desktop individual license support
•  Generic computers—Non-major vendors
•  ALL—This gives the driver all capabilities for any computer system

Firewall Issues

Configure the firewall between your server and the Internet as follows:

• Deny all incoming traffic from the Internet to your server.
• Permit incoming traffic from all clients to TCP port 135 (and UDP port 135, if necessary) on

your server.

• Open Port 445 (WMI)

«
...
23
24
25
26
27
...
»

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Reviews:

No comments

Related manuals for OpenManage Network Manager

Brand: EAW Pages: 36

VFABRIC GEMFIRE

Brand: VMware Pages: 2

Mobile Anti-Virus 60 Series

Brand: F-SECURE Pages: 90

ADVANCED SERVER

Brand: ACRONIS Pages: 2

LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS

Brand: Adobe Pages: 90

Applied Vision 4

Brand: Ken A Vision Pages: 16

HyperMedia Center

Brand: Genius Pages: 12

GIF ANIMATOR 4.0

Brand: Ulead Pages: 64

PC-over-IP Administrative Interface

Brand: EVGA Pages: 108

Brand: AVG Pages: 234

Auto Configuration Server Vantage Access

Brand: ZyXEL Communications Pages: 113

Brand: APPLIED ACOUSTICS SYSTEMS Pages: 60

Brand: Adobe Pages: 8

Brand: DCP Productions Pages: 76

STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008

Brand: Juniper Pages: 14

Disk Array Administrator

Brand: Adaptec Pages: 139

256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010

Brand: Autodesk Pages: 1638

Brand: DigiDesign Pages: 886

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands