Dell OpenManage Network Manager Client Manual Download Page 174

Page: 174 / 388

174

Managed Resources | Resource Management

IP Address

—The IP address of the device.

Vendor Name

—The vendor for this device.

Model

—The model of the device.

Equipment Type

—The type of equipment.

Firmware Version

—The firmware version of the device.

Software Version

—The software version of the device.

Last Backup

—The device’s last backup date.

Location Name

—The device’s location.

Hardware Version

—The hardware version for the device.

Backup Result

—The result the device’s last backup.

Restore Result

—The result the device’s last restoration.

This screen has several snap panels, some compressed “windowshade” style. Click the title bar for

these snap panels to toggle expand / collapse. These display information about the device selected

in the list at the top of the panel.

Reference Tree

This displays the device and connected components, tree style.

General: Details

This includes information about the

Equipment Name, Vendor, Location, Contact, Icon,

and

its

Last Modified

and

Discovery Date

General: Properties

This tab includes the

IP Address, DNS Hostname, Firmware Version, Hardware Version, Model,

Serial Number, Software Version, Managed by Hostname

(if active, this resolves a DNS name

rather than use an IP address to manage this resources)

and

Equipment Type

information.

General: Settings

This includes the

system Object Id, Date Created

(that is, discovered),

Creator

(the user who

performed discovery),

Install Date, Administrative State

(Locked [Device use is prohibited]

Shutting Down [Only existing users can use the device] Unlocked [Normal use of device is

permitted])

Operational State

(Disabled [Inoperable because of a fault, or resources are

unavailable] Enabled [Operable and available for use] Active [Device is operable and currently in

use with operating capacity available to support further services] Busy [Operable and currently in

use with no operating capacity to spare])OpenManage Network Manager.

Summary of Contents for OpenManage Network Manager





































































































































































































































































































































































































Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands

Dell OpenManage Network Manager, Client Manual

Search results

Summary of Contents for OpenManage Network Manager

Reviews:

Related manuals for OpenManage Network Manager

Brands by name

Popular brands