
Delem
V1101, 6.12
Parameter 23:
Hysteresis
Range
: 0.00 - 100
Default
:
1
Units
:
DA-points
Function
To determine the switch-off point (switch-off zone) for the programmed DA-value. See also
figure 6.1a.
Description
The hysteresis value determines the switch-off zone around the DA-value in the feedback
application. The value of the hysteresis depends on your crowning device. A hysteresis might be
necessary to stop the crowning device at the correct position, because of the inertia of the
crowning device.
Parameter 14:
Default value
Range
: -999999.00 - +999999.00
Default
:
0.00
Units
: display units
Function
Initial axis value
Description
The default value is used as initial value for the axis in case of a new numerical program (data
preparation menu).
Summary of Contents for DA-65
